top of page
telecom worker.jpg


  • While the Inside Wireman is installing the conduit and power feeders on a project, the Installer Technician is working beside the Wireman, installing the network of low voltage cabling that is used for video, voice and data or other low voltage signaling.

  • While most installations are in buildings that are partially or fully enclosed to protect from sun, wind and rain, these installations often occur before air conditioning, heat or permanent light fixtures have been installed in the buildings.

  • Backbone voice and data cables are routed between the entrance facility, where communications' signals enter a building, to equipment and telephone rooms. Voice and data horizontal cables are routed between telephone or equipment rooms and individual workstations throughout the building.

  • Equipment rooms often contain energized equipment such as hubs, file servers or telephone switches. These devices are configured and connected to the communications network that serves the building, and must not be interrupted.

  • The Installer Technician installs voice and data outlets at workstations. In addition, they install punch down blocks and cross connects in telephone rooms. These may be wall-mounted or rack-mounted, and must be grouped and identified according to specific installation standards. Whether the work is in new construction or in existing office or manufacturing space, the IBEW-NECA craftsperson takes pride in the work he or she has and can perform.

  • The electrical training ALLIANCE trains to TIA/EIA and other industry standards. The electrical training ALLIANCE also partners with the major manufacturers in the video, voice and data industry to assure training in the latest technologies including training for manufacturer's warranted installs.


  • Many of the work processes of the Installer Technician are listed below. There are many systems that utilize low voltage video, voice or data signals. Not all Installer Technicians work on all systems. However, properly trained Installer Technicians can work on a variety of systems, including systems for video, voice and data.

  • Plan and Initiate Projects

  • Install Underground Voice or Data Circuit Feeders to Entrance Facilities

  • Provide or Connect to the Grounding Electrode System

  • Install Pathways and Spaces for Installation of Low Voltage Wiring

  • Install, Terminate and Test Wires and Cables, both Copper and Fiber-Optic

  • Install, Test, Certify and Troubleshoot Local Area Network (LAN) Cabling Systems

  • Lay Out, Install and Verify Operation of Security and Access Control Systems

  • Install Communications and Sound Distribution Systems

  • Provide Testing, Analysis and Repair of Video, Voice and Data Systems; including Electronic Devices such as Gateways, Routers, Hubs, NIC Cards, Telephone Switches, etc.

  • Prefabricate Systems, such as Telecommunications Racks, for Field Installation

  • Work on other Sub-systems such as Communications, Entertainment, Environmental, Life Safety, Energy Management and Custom Lighting

bottom of page